4BTAA3.9-G58
- Rated Power
- 50
- Engine Type
- 4-Cylinder In-Line， Turbocharged
- Bore × Stroke
- 102 × 120
- Displacement
- 3.9
- Cooling System
- Air-to-Air Intercooled
- Fuel Type
- CNG
- Oil Requirement
- CH-4 or above grade gas engine-specific oil
- Reliability Test
- 2000-hour bench test for key components
- Warranty
- 12 months or 1，000 operating hours (whichever occurs first)
- Dimensions (L×W×H)
- Approx. 2100*850*1450
- Weight
- Approx. 950
- Application
- Construction Machinery， Marine Auxiliary
The compact, lightweight, and cost-effective Type B engine delivers cleaner and quieter performance, with a rated power output of 50 kW. Under strict adherence to maintenance guidelines, it achieves a mean time between failures (MTBF) of 1,500 hours and a mean time between overhauls (TBO) of 6,000 hours or more. Even under extreme duty cycle testing, this model maintains strong performance. Its low noise levels, reduced weight, and high power-to-weight ratio are all attributable to its world-class reliability.
Basic Specifications
- Compression Ratio: 10.5:1
- Bore: 102 mm
- Stroke: 120 mm
- Emission Control: ≤3%
- Aspiration: Turbocharged & Air-to-Air Intercooled
- Displacement: 3.9 L
- Number of Cylinders: 4
- Test Condition: Engine equipped with water pump and oil pump; without air compressor, generator, fan, optional parts and driving parts; intake resistance 3.7 kPa, exhaust resistance 10 kPa
- Flywheel Interface: 3#/11.5
- Dimensions (Standard Configuration, mm): 1080×625×1085
- Maximum Continuous Operating Altitude: 2200 m
- Performance Test Conditions: Atmospheric pressure 100 kPa, intake air temperature 25 °C, tested per GB/T18297
Engine Power Data
| Engine Speed (RPM) | Engine Power | Continuous Power of Generator Set | |
|---|---|---|---|
| kW | HP | HP | |
| 1500 | 58 | 78 | 67 |
| 1800 | 64 | 86 | 74 |
Performance Data at 1500 RPM
| Output Power | Gas Consumption | |||
|---|---|---|---|---|
| % | kW | HP | m³/kW·h | m³/h |
| Standby Power | ||||
| 100 | 58 | 78 | 0.33 | 19 |
| Basic Output Power | ||||
| 100 | 58 | 78 | 0.33 | 19 |
| 75 | 44 | 59 | 0.32 | 15 |
| 50 | 29 | 39 | 0.34 | 10 |
| 25 | 15 | 20 | 0.33 | 5 |
Performance Data at 1800 RPM
| Output Power | Gas Consumption | |||
|---|---|---|---|---|
| % | kW | HP | m³/kW·h | m³/h |
| Standby Power | ||||
| 100 | 64 | 86 | 0.33 | 21 |
| Basic Output Power | ||||
| 100 | 64 | 86 | 0.32 | 21 |
| 75 | 48 | 64 | 0.33 | 16 |
| 50 | 32 | 43 | 0.31 | 11 |
| 25 | 16 | 21 | 0.34 | 6 |
Typical Engine Data
- Dry Weight: 411 kg
- Transient Moment of Inertia (Without Flywheel): 0.25 kg·m²
- Distance from Center of Gravity to Front Face of Cylinder Block: 391 mm
- Distance from Center of Gravity to Crankshaft Centerline (Above Crankshaft): 140 mm
- Firing Order: 1-3-4-2
Engine Mounting
- Maximum Allowable Static Bending Moment at Rear Face of Cylinder Block: 1356 N·m
Exhaust System
- Maximum Exhaust Back Pressure: 10 kPa
Charge Air Cooling System
- Maximum Allowable Temperature Difference Between Intake Manifold and Inlet Air: 25 °C
- Maximum Allowable Pressure Drop Across Intercooler: 13 kPa
- Maximum Allowable Intake Manifold Temperature (Ambient 25 °C): 50 °C
- Maximum Allowable Intake Manifold Temperature: 58 °C
Intake System
-
Maximum Allowable Intake Resistance (Heavy-Duty Air Cleaner)
- Clean Filter Element: 3.7 kPa
- Dirty Filter Element: 6 kPa
- Minimum Dirt Holding Capacity of Heavy-Duty Air Cleaner: 53 g/litre/sec
- Maximum Temperature Rise from Ambient Air to Turbocharger Inlet: 17 °C
- Recommended Minimum Inner Diameter of Intake Pipe: 76 mm
Lubrication System
-
Normal Operating Oil Pressure Range
- Low Idle: 207 kPa
- Rated Speed: 345 kPa
- Maximum Oil Sump Temperature: 121 °C
- Oil Capacity (Offset Oil Sump): Max. 14.2 L – Min. 12.3 L
- Minimum Lubrication System Capacity (Oil Sump + Oil Filter): 16.4 L
- Inclination Angle with Offset Oil Sump
- Front Up: 40°
- Front Down: 40°
- Side to Side: 40°
Cooling System
- Coolant Capacity (Engine Only): 10 L
-
Maximum External Cooling Circuit Resistance
- 1800 RPM: 35 kPa
- 1500 RPM: 28 kPa
- Maximum Static Coolant Height Above Crankshaft Centerline: 1.4 m
- Standard Thermostat Opening Temperature (Range): 82–95 °C
- Minimum Pressure Cap Pressure: 69 kPa
- Maximum Coolant Temperature at Standby/Rated Power: 104 °C / 100 °C
Electrical System
| Item | Unit | Specification |
|---|---|---|
| Starter | volt | 12V / 24V |
| Battery Charging System (Negative Ground) | ampere | 63 / 40 |
| Maximum Starting Circuit Resistance | ohm | 0.00075 / 0.002 |
|
Minimum Battery Capacity
|
CCA | 800 / 400 |
|
|
Emission Data (Tested per GB 20891-2007)
At Rated Speed 1500 RPM
| Pollutant | Unit | Value |
|---|---|---|
| NOx | g/kW·h | 9.2 |
| HC | g/kW·h | 1.3 |
| CO | g/kW·h | 5.0 |
| Particulate Matter | g/kW·h | 0.70 |
At Rated Speed 1800 RPM
| Pollutant | Unit | Value |
|---|---|---|
| NOx | g/kW·h | 9.2 |
| HC | g/kW·h | 1.3 |
| CO | g/kW·h | 5.0 |
| Particulate Matter | g/kW·h | 0.54 |
Additional Operating Parameters
| Item | Unit | Standby Power | Rated Power | ||
|---|---|---|---|---|---|
| 1800 RPM | 1500 RPM | 1800 RPM | 1500 RPM | ||
| Low Idle Speed | rpm | 750–850 | 750–850 | 750–850 | 750–850 |
| Output Power | kW | 64 | 58 | 55 | 50 |
| Piston Speed | m/s | 7.2 | 6.0 | 7.2 | 6.0 |
| Friction Loss Power | kW | 9.3 | 8.7 | 8.5 | 6.4 |
| Engine Coolant Flow | litre/sec | 2.4 | 2.0 | 2.4 | 2.0 |
| Intake Air Flow | litre/sec | 43.0 | 32.9 | 43.0 | 32.8 |
| Exhaust Gas Flow | litre/sec | 81.9 | 71.0 | 78.5 | 67.5 |
| Exhaust Temperature | °C | 570 | 540 | 540 | 500 |
| Air-Fuel Ratio | air:fuel | 12:1 | 12:1 | 12:1 | 12:1 |
| Ambient Heat Loss (Dry Manifold) | kW | 20 | 18 | 18 | 16 |
| Coolant Heat Loss (Dry Manifold) | kW | 38 | 35 | 25 | 25 |
| Exhaust Heat Loss | kW | 54 | 48 | 45 | 40 |
Hot Searches
Contact Supplier
We have more categories for you. lf you can't find the products you want above,just fill in the form and tell us whatproducts you want to import from China.
