VAMPOL brand New LED Solar Light Human Infrared PIR Motion Sensor Wall Lamp Security Outdoor Lighting Waterproof IP65 Garden Lamp for Pathway
Specifications:
Type 1: 30LEDs Solar Lamp
Solar panel:5.5V 0.55W
Size:L124*W96*H48m
LED:30LEDs
Sensor mode:Light sensor & Dim light & Motion senor
Sensor angle : 90°~120°
Sensitivity distance:3M
IP Rating: IP65
Working temperature: -5~60°C
Housing material:ABS
Type 2: 28LEDs Solar Lamp
Specification:
Solar panel:5.5V 0.75W
Size:L105*W53*H138mm
LED:28LEDs
Sensor mode:Light sensor & Dim light & Motion senor
Sensor angle:90°~120°
Type 3: 55LEDs Solar Lamp
Solar panel:5.5V 10W
Size:L193*W5115*H43mm
LED:55LEDs
Sensor mode:Light sensor & Dim light & All Lighting
Features:
3 Lighting Modes
The solar light comes equipped with 3 lighting modes: Sensor, Dim,and All-lighting
A.Sensor Mode
This mode keeps the light off at all during the day when there is sufficient natural light.
In the night the lamp remains off until the sensor detects nearby movement. The sensor then turns the light on.Then light on. The light remains on throughout the proximal motion, and stays on for anotter 30 seconds after the movement has stopped or left the area.
B.Dim mode
This mode keeps the light off at all times during the day when there is sufficient natural light,and turns the light on in dim mode during the night,Upon detecting nearby movement, the sensor brightens the light.The light remains bright throughout the proximal motion,and returns to dim mode 30 seconds after the movement has stopped or left the area.
C.All Lighting mode
This mode keeps the light off at all times during the day when there is sufficient natural light.During the night it keeps the light on in bright mode at all times,whether in the presence or absence of proximal motion.This bright-lighting mode lasts for up to 6 continuous hours at night after the lamp has been fully charged for 7-8 hours in sunlight.
1.Select the desired lighting mode to activate the solar lamp (1),(2),or(3).
2.Fix the pillar hinges 85mm apart in the wall.Twist the screws into the pillar hinges,leaving some space for hanging the unit.
3.Fix the pillar hinges 85mm above the position of the screws.
4.Hang the unit at the level and positions of the screws via the holes in the lamp-unit.Twist the pillar hinges into place.
5.The installation of the lamp is now complete.
