Home

Contact Supplier

To: Annie Fu

Email:

Message:

Solar pump with s/s impeller 600W for system

Inquiry Chat Now

You might also like

Product description

Solar pump with s/s impeller 600W for system

Solar Pumps are more and more popular around the world...

(1) Reliable: Photovoltaic power supplies rarely use moving parts and work reliably.
(2) Safe, no noise, no other public hazards. Does not produce any solid, liquid

and gaseous harmful substances, absolutely environmentally friendly.
(3) Simple installation and maintenance, low operating cost, suitable for unattended.

In particular, it is highly regarded for its high reliability.
(4) Good compatibility, photovoltaic power generation can be used in conjunction

with other energy sources, and the photovoltaic system can be easily added to capacity as needed.
(5) The degree of standardization is high, and the components can be connected

in series and parallel to meet the needs of different power consumption, and the versatility is strong.
(6) Solar energy is available everywhere and has a wide range of applications.

The composition of the system:
PV array	It mainly converts the solar light energy into electrical energy and provides working power to the load pump motor.
Photovoltaic water pump inverter or controller	Control and adjust the operation of the solar water pump, use the electric energy generated by the solar array to drive the water pump, and adjust the output frequency in real time according to the change of the sunshine intensity, so that the output power is close to the maximum power of the solar array.
Motor (drive motor)	The drive motors used in different systems are also different. At present, in the photovoltaic pump system with less than 10 Np power levels, in order to obtain the highest possible system efficiency, DC brushless permanent magnet motor drive is often used. In the large-scale PV pump system, there is still no shortage of AC asynchronous transmission. However, due to the continuous development of modern control technology, in order to further increase the amount of water supplied by the unit peak tile, there has been a trend of replacing the multi-machine group control technology that is controlled by multiple pumps.
Water pump	For photovoltaic pump systems, the choice of pump type is also important. In a system with low power, if the user requires a high lift but a small flow, a positive displacement pump should be selected. In other cases, a centrifugal or axial flow pump may be used.
Water tower and water storage facility	If the PV pump system is used in cold regions in winter (such as the vast western region of China), it is advisable to use anti-freezing water storage facilities, such as double-deck tanks or water towers with vacuum or solid insulation materials in the middle, and the water diversion pipelines should also be resistant to low temperature materials. Antifreeze treatment.

Application- Solar pump with s/s impeller 600W for system

How to choose suitable solar water pump?

Pump specification selection:
1. Initial selection of flow: determine pump flow based on demand
2. Determination of the pipeline: Calculate the critical settlement flow

rate according to the transport medium, and select the pipeline diameter reasonably
3. Calculation of pipeline loss: Calculate pipeline loss according to pipeline

length and number of bends and valves
4. Pump head calculation: Pump head = vertical height difference from water

surface to outlet + pipeline loss + outlet pressure + safety margin (10%)
5. Determine the pump model according to the flow head

Pump Models-DC solar water pump 24V 200W 25m head with heavy duty high pre

ssure for agriculture

Solar pump with s/s impeller 600W for system working principle

The solar DC deep well submersible pump is a combination of solar panel light

energy into electric energy and low-voltage dedicated solar water pump. It does

not need to lay cable lines, which is convenient and practical, and easy to operate.

There is no need to configure the battery. When there is sunlight, the pump

automatically pumps water and stops working without sunlight. If the battery

is configured, it can be pumped continuously and can be used continuously on rainy days.

Advantages of low-pressure solar pumps- Solar pump with s/s impeller 600W for system

1. Permanent magnet brushless synchronous motor: increase efficiency by 15%-20%,

save energy and reduce solar panel consumption

2. 321 stainless steel motor shaft; 304 stainless steel pump shaft

3. 304 stainless steel impeller; copper cylinder

4. Japan NSK Bearing

5. Alloy mechanical seal, long life and reliable operation

6. Intelligent water shortage protection: the program detection automatically stops

when there is no water in the well, and automatically starts after 30 minutes.

7. The synchronous motor has high power density, and the weight and volume of the

same power pump are smaller than those of other manufacturers.

8. Pump 3 years warranty, solar panel 10 years warranty, controller 1 year warranty

(1) MPPT function, the highest solar utilization rate

(2) The 24V/48V/96V controller has an automatic charging function to

ensure that the solar pump is charged while charging the battery; in the

absence of sunlight, the battery can keep the solar pump working continuously.

(3) Digital display of power, voltage, current, speed and other working conditions

(4) Frequency conversion function: It can automatically convert the frequency

according to the sunlight power, and can also manually adjust the speed operation according to actual needs.

(5) Automatic power on and off

(6) Waterproof and sealed: double sealing effect

(7) High temperature resistance: up to 850C high temperature

(8) Soft start: no inrush current, protect the pump motor

(9) High/low voltage protection, overcurrent/overload protection, stator coil never burns.

Workshop-Solar pump with s/s impeller 600W for system

Products Packing

Shipping

Solar pump with s/s impeller 600W for system

Julie,Tu