Contact Supplier
- Categories
- Electronics Product
- Beauty / Personal Care
- Furniture / Building Materials
- Automotive Machinery
- Ladies clothing
- Home Department Store
- International Logistic Service
Electronics Product
Beauty / Personal Care 
Furniture / Building Materials 
Automotive Machinery 
Home Department Store 
International Logistic Service
Performance Indicators
Technical Indicator
Typical values
Solids Content
≥ 85%
88%
Elongation at Break
≥ 500%
700%
Real Dry Time
≤ 24h
6h
Surface Dry Time
≤ 12h
4h
Low-Temperature Flexibility,
-35℃，Crack-free
-35℃，Crack-free
Watertightness
0.3MPa ，120min,water tight
0.3MPa ，120min, water tight
Single component polyurethane waterproof coating
Type: Single-component
Physical State: Liquid
Color: Black/Green
Density: 1.3-1.4 kg/L
Open Time: 4 hours
Packaging Form: Iron drum
Packaging Specification: 20 kg/drum
Product description:
This type of waterproof coating is made from isocyanate and polyether polyol as the main raw materials, combined with special additives, fillers, and pigments. It is produced through a polymerization reaction in advanced equipment. When applied, it forms a continuous, seamless waterproof membrane with rubber-like properties on the waterproof base layer by reacting with the moisture in the air.
Product Features :
1、The single-component reacts with the moisture in the air to form a flexible rubber waterproof membrane.
2、Easy to use, ready to apply straight from the container.
3、The coating is dense, with no pinholes or bubbles.
4、High strength, good elongation, excellent elasticity, and strong resistance to substrate deformation (shrinkage and cracking).
5、Resistant to water erosion, chemical corrosion, and mold.
6、Environmental friendly, free from toxic solvents such as benzene, toluene, xylene, and without coal tar components.
Product specification:
How to Use:
Consumption: Approximately 1.6 kg/m² to 1.8 kg/m²
Construction Process: Subgrade treatment → Detailed additional waterproof layer construction → Large area coating waterproof layer construction → Head and edge sealing → Quality inspection and acceptance → Protective isolation layer construction.
Construction Points:
1、Ensure the subgrade is flat, solid, and dry, free from sharp bumps, honeycombing, pockmarks, and peeling, and without oil contamination. For cracks, deformation joints, and recesses around pipes, fill with sealing materials and apply additional waterproof treatment. A smooth and solid subgrade does not require a subgrade treatment agent.
2、For details like corners, pipe roots, and deformation joints, apply additional waterproof layers first, which can be applied 2-4 times (thickness not less than 1mm). If a reinforcing material is required, ensure it is thoroughly soaked. For deformation joints, lay a layer of polyester non-woven fabric first, then apply additional coating to form an empty laid additional waterproof layer structure.
3、For the large area coating waterproof layer, use a plastic scraper to evenly spread the coating in 2-3 layers. Without a subgrade treatment agent, the first layer should be thin to seal the pores of the subgrade. After full curing until the surface is not sticky to the touch (usually 12 hours, which may be extended in low temperatures), apply the second layer perpendicular to the first. If a reinforcing material is used, lay it while applying the coating.
4、Seal the head and edges with additional coatings.
5、After the waterproof layer is completed and has passed the quality inspection (and if necessary, a water retention test), proceed with the construction of the protective isolation layer according to relevant specifications or design requirements.
Precautions:
1、The construction temperature should be between 5-35℃. Do not construct in rainy or snowy conditions.
2、Ensure good ventilation during construction and that construction personnel wear appropriate safety equipment.
3、The product is ready to use directly without any diluents. If dilution is necessary, consult with technical personnel and conduct a small-scale test on site to ensure it does not affect the drying speed before applying it on a large scale.
Product application:
It is suitable for waterproofing projects such as underground works, bathrooms, kitchens, balconies, pools, parking lots, and also applicable for non-exposed roof waterproofing projects.
Finding a reliable supplier and ensuring
error-free production can be overwhelming.
As a leading sourcing company in China,
We have hundreds of experrts who can handle
the entire sourcing process from finding
suppliers to delivering products.
