Product Features
Uniaxial front-back operation or unidirectional operation.
Friction positioning or spring return, mechanical lock can be selected for neutral position and starting point.
Choice of potentiometer or non-contact Hall angle detection method.
Optional direction micro switch (switch maximum current 10A @ 30Vdc).
It can be equipped with the upper end of a variety of handles.
Application range
This series of products are mainly used in electro-hydraulic control systems or other electrical control systems of various engineering vehicles.
Technical Information
Electrical parameters
Potentiometer type
Power supply voltage
|
<36Vdc
|
Total resistance value
|
10KΩ (± 10%)
|
Center dead zone angle
|
± 3 °
|
Maximum power
|
0.2W
|
Hall type
Power supply voltage
|
5 ± 0.5Vdc
|
Power supply current
|
<11mA (rated power supply voltage)
|
Limit allowable voltage
|
20Vdc
|
Reverse limit allowable voltage
|
-10Vdc
|
Linear error of output voltage
|
<± 0.2V
|
With conversion circuit
Input voltage
|
18 ~ 36Vdc (U 21 ~ U 25)
|
|
9 ~ 36Vdc (I 21 ~ I 22)
|
Power consumption current
|
<20mA
|
Maximum output current
|
10mA (at standard voltage output)
|
|
|
Micro Switch
Load capacity
|
10A @ 30Vdc (resistive load)
|
Service life
|
more than 30 million times (mechanical)
|
|
200,000 times (electrical)
|
Insulation resistance
|
> 100MQ (500Vdc insulation resistance meter)
|
Insulation resistance
|
> 100MQ (500Vdc insulation resistance meter)
|
Starting angle
|
± 5 °
|
Mechanical parameters
Rocking angle
|
± 37.5 ° or 75 ° (single direction)
|
Mode of operation
|
Automatic spring reset or friction positioning
|
Starting force
|
8N (spring) 16N (friction)
|
Maximum operating force
|
18N (spring) 16 (friction)
|
Limiting force
|
> 300N
|
Service life
|
> 2 million times (potentiometer type)
|
|
> 5 million times (Hall type)
|
Weight
|
500g (no upper end)
|
|
|
Environmental parameters
Working temperature
|
-30 ℃ ~ + 70 ℃
|
Storage temperature
|
-40 ℃ ~ + 85 ℃
|
Protection grade
|
IP65 (above the installation panel)
|
|
|
Product selection
series
HJ20
Operation method
Friction positioning
FCF
|
median with feel
|
FEF
|
starting with feel
|
FCL
|
neutral mechanical lock
|
FEL
|
starting point mechanical lock
|
Spring return
SCO
|
back to median
|
SCL
|
back to neutral position, neutral mechanical lock
|
SEO
|
back to the beginning
|
SEL
|
back to starting point, starting point mechanical lock
|
Note:
The mechanical lock is only applicable to the upper end of the BG handle
Micro switch (not available when CAN bus is output)
MS00
|
without micro switch
|
MS22
|
with 10A front and back position micro switch
|
MS23
|
with 10A neutral position normally closed and front and back position micro switch
|
output signal
|
|
Potentiometer type (power supply voltage <36VDC)
P101
|
10KQ center tapped potentiometer
|
The
Hall type (supply voltage 5VDC)
H51
|
0.5 ~ 2.5 ~ 4.5VDC voltage output
|
H52
|
0 ~ 2.5 ~ 5VDC voltage output
|
H53
|
1.25 ~ 2.5 ~ 3.75VDC voltage output
|
With conversion circuit
U21
|
with conversion circuit, power supply voltage 18 ~ 36VDC, -10V ~ 0V ~ + 10V voltage output
|
U22
|
with conversion circuit, power supply voltage 18 ~ 36VDC, + 10V ~ 0V ~ + 10V voltage output
|
U23
|
with conversion circuit, power supply voltage 18 ~ 36VDC, -5V ~ 0V ~ + 5V voltage output
|
U24
|
with conversion circuit, power supply voltage 18 ~ 36VDC, + 5V ~ 0V ~ + 5V voltage output
|
U25
|
with conversion circuit, power supply voltage 18 ~ 36VDC, 0V ~ + 10V voltage output
|
U26
|
with conversion circuit, power supply voltage 18 ~ 36VDC, 6V ~ 12V ~ 18V voltage output
|
I21
|
power supply voltage 9 ~ 36VDC, two-wire system 4MA ~ 12MA ~ 20MA current output
|
I22
|
power supply voltage 9 ~ 36VDC, two-wire system 20MA ~ 4MA ~ 20MA current output
|
NA
|
no analog signal output
|
Upper end of handle
BG
|
upper end of BG type handle, top palm operation
|
HB
|
HB type handle upper end, no button
|
HBS
|
upper end of HBS type handle with one button
|
HBR
|
HBR type handle upper end with rocker on top
|
Outgoing way
L
|
wire output (without shell
|
A
|
AMP connector
|
Electrical Installations
Pin Potentiometer type Hall type Voltage output with conversion circuit Current output with conversion circuit
1 5VDC power supply voltage at the front end of the potentiometer
|
2 Unidirectional empty GND
|
3 Rear end of potentiometer GND output + empty
|
4 Potentiometer wiper output output-empty
|
5 Front direction switch (normally open) Unidirectional start switch (normally open)
|
6 Common terminal of forward direction switch
|
7 Rear direction switch (normally open) One-way empty
|
8 Common terminal of rear direction switch One-way empty
|
9 Rocker switch left direction (normally open)
|
10 Common end of handle upper switch
|
11 Rocker switch right direction (normally open)
|