Introduction
This is the first Big Size Cessna 310 Grand Cruiser Twin Motor airplanes made by the hard marteria EPO in the market. The airplane has very nice Scale-Look and details. It has two preinstalled powerfull brushless motor and 3-Blad Prop. All servoes, Receiver and ESC are perinstalled from the Factory. The model is designed for Optional Electric Retract. Flaps are also designed in the wing and if you like to use plap for landing/Take off you need just to installe two Micro servoes in the wing (the place for flap servo is also designed in the wings). The surface of the EPO material in this model is extreemly flat and strang. The complet model is made BY EPO which is very hard and it is the most crash-resistance material. The model is avalble in 2 different Version; RTF version which is include all what you need to fly the model include 5-CH 2.4GHZ radio, PnP Version which is Include all what you need to fly the model except Transmitter and Receiver and the last version is PnP include Electrice retractble landing gear. The Building time is around 90 mins...
Specifications for 50.4 Inch EPO Cruiser Plane Model Cessna 310:
| Material: |
Durable EPO Foam |
| Wingspan: |
50.4 inches (1280mm) |
| Overall Length: |
43.3 inches (1100mm) |
| Flying Weight: |
42.33 oz (1200 g) |
| Motor Size: |
2 x 3300kv outrunner brushless motors (installed) |
| Radio: |
2.4ghz 5-6 channel (not included) |
| Servos: |
4 x 9g Servos (installed) |
| Speed Control : |
50A-5A BEC (installed) |
| Battery: |
3s 11.1V 2200mAh 25C Lipo Battery (not included) |
| Charger |
3s lipo battery balance charger (not included) |
| Flight Times |
Average (6-12 mins) |
| Assembly Time |
Around 45min, depend on your experience |
Cessna 310 Cruiser Plane PNP includes everything except RC, Battery, Charger.
More nice photos for Cessna 310 RC Cruiser:
