rapid surfaces or solids screening panel test

Instruction Sheet for testing of any combination of the following drugs:

ACE/AMP/BAR/BZO/BUP/COC/THC/MTD/MET/MDMA/MOP/OPI/MQL/PCP/PPX/TCA/TML/KET/OXY/COT/FYL/MPD/ZOL/LSD/K2

A rapid, test for the detection of drugs on surfaces and in solids.Test intended to be used as analytical device to detect drugs on surface.

【INTENDED USE】
The Multi-Drug Rapid Test Panel is a rapid chromatographic immunoassay for the qualitative detection of multiple drugs and drug metabolites on surfaces and in solids at the following cut-off concentrations:

【DIRECTIONS FOR USE 】
Test device (in closed pouches), samples, and controls should be brought to room temperature (15-30°C) prior to testing. Do not open pouches until ready to perform the assay.Remove the test device from its protective pouch and label the device with patient’s identification or control

label.
FOR SURFACES
1. Wipe with the strips over the surface in which the drugs are expected
2. Take off the cap of supplied tube;
3. Fill all buffers from the supplied tube of buffer into the protection cover.
4. Insert the Multi Test slowly and carefully into the protection cover with buffer
5. Wait for lines to appear on the membrane and read the results after 5 minutes