Original Germany SICK Contrast sensors KT5W-2P1116D Color mark Sensor, Contrast Sensor

You might also like

Product description

KT5W-2P1116D color mark sensor is widely use in the Printing machine , bag making machine , slitting machine and lamination machine

FEATURES

1) Limit values when operated in short-circuit protected network: max. 8 A.

2) May not exceed or fall below Uv tolerances.

3) Without load.

4) With light/dark ratio 1:1.

5) Signal transit time with resistive load.

6) Short-circuit protected.

7) Reference voltage DC 50 V.

Dimensions (W x H x D)	30.4 mm x 53 mm x80 mm
Sensing distance	10 mm
Housing design (light emission)	Rectangular
Sensing distance tolerance	+- 3 mm
Light source	LED, RGB 2)
Wave length	470 nm, 525 nm, 640 nm
Light emission	Long and short side of housing, exchangeable
Light spot size	1.2 mm x 4.2 mm
Light spot direction	Vertical 3)
Adjustment	Teach-in button
Teach-in mode	Static 2-point teach-in
1) From front edge of lens.
2) Average service life: 100,000 h at TU = +25 C.
3) In relation to long side of housing

MECHANICS/ELECTRONICS

Supply voltage	10 V DC 30 V DC 1)
Ripple	<=5 Vpp 2)
Power consumption	< 130mA 3)
Switching frequency	10 kHz 4)
Response time	50 us 5)
Output type	PNP
Switching output (voltage)	PNP: HIGH = VS– ≤ 2 V / LOW approx. 0 V
Output current Imax.	100 mA 6)
Retention time (ET)	25 ms, non-volatile memory
Connection type	Male connector M12, 5-pin
Protection class	II 7
Circuit protection	UV connections, reverse polarity protected Output Q short-circuit protected Interference pulse suppression
Enclosure rating	IP 67
Weight	400 g
Housing material	Zinc diecast

AMBIENT DATA

Ambient operating temperature	-10 C .+55 C
Ambient storage temperature	-25 C+75 C
Shock load	According to IEC 60068

Supplier's popular products