New Product Solar Pump Controller Mppt Water

solar pump controller mpptsolar pump controllersolar pump water

I scope of application:

Pumps are suitable for the discharge of industrial and commercial seriously polluted wastewater, sewage disposal stations in main residential areas, water distribution systems in urban sewage treatment plants, drainage stations in civil air defense systems, water supply equipment in waterworks, sewage discharge in hospitals and hotels, municipal engineering construction sites, auxiliary machines in mines, rural biogas digesters, farmland irrigation and other industries, as well as sewage and dirt from conveyor belt particles, as well as clean water and weakly corrosive media.

II. Conditions of Use:

1. Sewage pump series products are applicable when the rated voltage is 380V and the power frequency is 50Hz

2, the medium temperature does not exceed 40 degrees Celsius, the medium density is less than or equal to 1150 kg/m3, and the pH value is in the range of 5-9;

3, the altitude is not more than 1000 meters;

4. The annual viscosity of the conveying medium shall not exceed 1000CP;;

5. The product must be completely submerged during operation, but the diving depth shall not exceed 10m.

6. The product is mainly made of cast iron and cannot be used in highly corrosive or corrosive media.

Note: Make sure that the actual use conditions of the pump conform to the above terms before selection, installation and use, so as to ensure the correct use of the product!

Three, product characteristics:

1. Double-blade impeller structure is adopted to greatly improve the dirt passing capacity.

2. The mechanical seal adopts a new grinding and polishing pair and operates in the oil chamber for a long time.

3, the overall structure is compact, the volume is small, the noise is small, the energy-saving effect is remarkable, the maintenance is convenient, and the user is convenient to replace.

4. The automatic control cabinet can automatically control the over-operation and stop of the pump according to the change of the required liquid level without the need for special personnel to take care of it, which is extremely convenient to use.

5. The installation method can be equipped according to the user's needs. It is extremely convenient for installation and maintenance. People can enter the sump without this.

6, can be used within the design range, and ensure that the motor will not overload.

Partial performance parameter table

structural representation