New Arrival Recycle Small 2 Inch Inline Water Booster Pump

recycle water pumpsmall inline water pump2 inch inline water booster pump

Product features

1. Smooth operation: The absolute concentricity of the pump shaft and the excellent dynamic and static balance of the impeller ensure smooth operation.

2. Water tight: Hard alloy seals made of different materials ensure that there is no leakage during the transportation of different media.

3. Low noise: The water pump under the two low noise bearings runs smoothly and is basically free of noise except for the weak noise of the motor.

4. Low failure rate: the structure is simple and reasonable, the key parts are matched with excellent quality, and the trouble-free working time of the whole machine is greatly improved.

5. Easy maintenance: easy and convenient replacement of seals and bearings.

6. Less floor space: The outlet can be in three directions: left, right and upward, which is convenient for pipeline layout and installation and saves space.

use

1. It is used for conveying clear water and other liquids similar in physical and chemical properties to clear water. It is suitable for industrial and urban water supply and drainage, pressurized water supply for high-rise buildings, garden irrigation, fire pressurization and equipment matching.

2. The pump is suitable for high-temperature hot water pressurizing and circulating delivery of boilers in energy, metallurgy, chemical industry, textile, paper making, hotels and restaurants, etc. and circulating pumps for urban heating systems.

3. It is used to transport liquid that does not contain solid particles, is corrosive and has viscosity similar to water, and is suitable for petroleum, chemical industry, metallurgy, electric power, papermaking, food, pharmacy, synthetic fiber and other departments.

4. For transporting petroleum products such as gasoline, diesel oil and kerosene.

Conditions of use:

1. The suction pressure is ≤1.0Mpa, or the high working pressure of the pump system is ≤1.6Mpa, i.e. the pump suction pressure+pump head ≤ 1.6Mpa, and the static pressure test pressure of the pump is 2.5Mpa. Please indicate the working pressure of the system when ordering. When the working pressure of the pump system is greater than 1.6Mpa, it shall be proposed separately at the time of ordering. So as to adopt cast steel materials for the over-current components and the connecting parts of the pump during manufacturing.

2. ambient temperature < 40°C, relative humidity < 95%.

3. the volume content of solid particles in the transported medium shall not exceed 0.1% of the unit volume and the particle size shall be less than 0.2 mm.

Note: If the medium used is with fine particles, please explain it when ordering so as to adopt wear-resistant mechanical seal. Partial performance parameter table