Material | Aluminum Foil |
Color | Sliver |
Width | 6cm or customized |
Length | up to 1500m |
Thickness | 42mic-73mic(1.68mil-2.92mil/0.042mm-0.073mm) |
Service Temperature | -30 ~ +120ºC |
Applying Temperature | +10 ~ +40ºC |
Tensile Strength | 70N/25mm |
Tack Rolling Ball | 20cm |
Peel Adhesion | 20N/25mm |
Packing | Normal carton size, 36rolls per carton; or as your request |
Advantage | Long holding power, water acrylic with good effect |
TYPICAL APPLICATIONS: industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. General purpose holding, patching, sealing and masking applications – indoors and outdoors.
PRODUCT FORM & SIZE AVAILABLE
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4").
Log Roll: 1200mm x 45 / 50m Roll: 1200mm x 1000m / 1200m
STORAGE & SHELF LIFE: 12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.
SURFACE PREPARATION: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease, oil or other contaminants.
PRODUCT USE: It is essential that the user evaluate the product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on product between +10 ~ +40°C (+50 ~ +105 °F).
1.What is insulation product?
Insulation product is used to cover pipes, ducts, tanks, and equipment in commercial or industrial environments and is typically relied upon to control temperature for a much broader range of temperature variances that of a typical home. Home or residential insulation is typically found in the exterior walls and attics and is used to keep the home environment a consistent, comfortable living temperature. The temperature differential in a home insulation environment is in most cases far less than that of a typical commercial or industrial application.
2.What about the lead time?
The bulk goods order production delivery time will be within three weeks after receiving the down payment.
3.How are your products tested?
We normally test BS476, DIN5510, CE, REACH, ROHS, UL94 at an independent lab. If you have a specific request or a specific test request please contact our technical manager.
4.What type of your company?
We are an enterprise integrating manufacture industry and trade.
5. What is your main product?
NBR/PVC rubber foam insulation
Glass Wool Insulation
Insulation Accessories