Fully Automatic 1600 Bottles Per Hour 6 Litre 6L 5L 5 Liter Plastic PET Bottle Blowing Machine

Real Scene Shoots

Jiangmen First Drinking Water Equipment Co., Ltd.

16 Years Alibaba Gold Supplier
18 Years Professional Experience
12500 Square Meters Standard Factory
257000 USD Alibaba Trade Assurance
108000000 Yuan RMB Registered Capital

CE, SGS, BV Product Quality Certification
ISO 9001:2008 Quality Management System

Address: No. 141 (Factory), Lubian Industrial Zone, Chaolian Town, Pengjiang District, Jiangmen, Guangdong, China

Welcome to China! Welcome to our factory!

High Speed Linear Two-step PET Bottle Blowing Machine

for ≤0.6L,1L, 2L, 5L, 10L, 20L PET Bottle

1.The built-in continuous rotating infeed system effectively reduces the space occupied. The consistency of preform position streamlines the process.
2.63mm pitched, more preforms are uninterruptedly heated within the same distance, which improves the efficiency and energy saving.
3.The thermostatic heating system ensure that the heating temperature of each preform surface and internal is uniform. Hinged oven holders make it easy for the operators to change infrared tubes and do maintenance.
4.The perform transfer system with grippers and the variable pitch system are both driven by the servo motors to ensure high speed and accurate preform handling between the two mechanism.
5.The Servo driven the molding mechanism, triggering off the linkage to the bottom mold. The application of high speed precision blowing valve unit helps to make high capacity.
6.The cooling system for the preform neck is equipped to ensure the preform neck does not deform during heating and blowing.
7.High pressure blowing air recovery system saves up to 30% of HPC air.
8.Being highly intelligent, the machine is equipped with the units of preform temperature detection, leaking bottle detection and rejection as well as jammed air conveyor detection, ect, which ensures the machine work efficiently and stably.
9.Operation on the touch screen is simple and easy.
10.This series is widely used for making PET bottle for drinking water, edible oil, food, daily chemical......ect.

Blow Molding Process Flow:

Technical Parameter:

Due to continuous technical development specification would be improved without prior notice.

Special design correspond to customers need. 

Layout of the auxiliaries and the main machine