Product Features
Fingertip daul-axis handle.
The spring return.
Angle detection method with center tapped potentiometer.
Maximum current 2mA direction switch.
Can be equipped with proportional amplifier board to directly drive hydraulic proportional valve
Application range
This series of products are mainly used in engineering vehicles and industrial remote controls.
Technical Information
Electrical parameters
|
Power supply current |
<36Vdc |
|
Total resistance value |
5KΩ |
|
Electrical angle |
± 30 ° |
|
Median voltage |
48% ~ 52% (relative power supply voltage) |
|
Median dead zone angle |
± 2.5 ° |
|
Potentiometer maximum voltage |
32 VDC |
|
Power supply curren |
t <36Vdc |
|
Total resistance value |
5KΩ |
|
Electrical angle |
± 30 ° |
|
Median voltage |
48% ~ 52% (relative power supply voltage) |
|
Median dead zone angle |
± 2.5 ° |
|
Potentiometer maximum voltage |
32Vdc |
|
Potentiometer allows maximum power consumption |
0.25W (25 ℃) |
|
Direction switch Load capacity |
2mA @ 30Vdc (resistive load) |
|
Starting angle |
± 3 ° ~ ± 5 ° |
|
Contact resistance |
<200Ω |
Mechanical parameters
|
Rocking angle |
± 32 ° |
|
Mode of operation |
Automatic spring reset, biaxial operation in any direction |
|
Starting force |
3.8N |
|
Maximum operating force |
12N |
|
Limiting force |
300N (H upper end is greater than 160N) |
|
Service life |
> 2 million times |
|
Weight |
125g |
Environmental parameters
|
Working temperature |
-30 ℃ ~ + 70 ℃ |
|
Storage temperature |
-40 ℃ ~ + 85 ℃ |
|
Protection clas |
s IP50 (above the installation panel) |
Product selection
Series
FJ11
Operation method
|
1A |
Single axis operation in front and back direction |
|
2AC |
any operation direction of dual axes (with guide groove |
Output signal
[Potentiometer type (power supply voltage <36Vdc)]
|
P051 |
5KQ potentiometer, 0 ~ 100% Vdc voltage output with front and rear direction switches |
PWM with amplifier board
|
PWM 224 |
power voltage 24Vdc, 2 outputs |
|
PWM 424 |
power supply voltage 24Vdc, 4 outputs |
|
PWM 212 |
power voltage 12Vdc, 2 outputs |
|
PWM 412 |
power supply voltage 12Vdc, 4 outputs |
Upper end of handle
|
S |
upper end of S-shaped handle, no button |
|
L |
upper end of L-shaped handle, no button |
|
H |
upper end of H-shaped handle with button |
Terminal Potentiometer type
|
1 Switch common |
|
2 Front direction switch |
|
3 Rear direction switch |
|
4 Slider of potentiometer |
|
5 Potentiometer A |
|
6 potentiometer center |
|
7 Potentiometer B |
|
8 Button switch |
|
9 Button switch |
We have more categories for you. lf you can't find the products you want above,just fill in the form and tell us whatproducts you want to import from China.
