Dry type static electricity remove bar For high speed slitting machine

Dry type static electricity remove bar  For high speed slitting machine 

Dry type New type Nano induction static remove bar, need to be equipped with ion generator. the ion induction electrostatic eliminating cable ends inserted into the ion generator output jack, at the end of clockwise, then the induction electrostatic eliminating bar wiring line is connected to the outside parties of grounding screw ion generator , after confirm the good grounding, insert the plug of the generator into the socket which with ground wire,,then fixed The electrostatic eliminating on the suitable position,open the generator power supply , static elimination and be able to start working

Product Feature

1. Quickly neutralizes static.
2. Large ion airflow coverage area
3. The static elimination device has good grounding protection.

Technical Parameter

Test result:

1.    Destaticizing time meet the  ESD standard, testing voltage from 5000v to 500v

2.    Test Result based on ME268A electrostatic test meter

3.    Test results will be a little different due to condition, Temperature and humidity etc

Safe Instruction :

1. Read operation manual before installation.

2. Make sure grounded well before operation.

3. Please don’t use this device in flammable and combustible environment.

4. Don’t allow to repair it without permit.

5. Power supply must be connected with machine, opened and closed with machine.

6. Pressure air must be clean without water vapour and impurity

Application:

Widely used in electronics, plastic,chemical,printing, packaging and optoelectronics industries.