CHINA PROFESSIONAL WATER PUMP MANUFACTURE AC load power 1300W

CHINA PROFESSIONAL WATER PUMP MANUFACTURE AC LOAD POWER 1300W

A photovoltaic solar powered pump system has three parts: solar panels, the controller, the pump
The solar panels make up most (up to 80%) of the systems cost. The size of the PV-system is directly dependent on the size of the pump, the amount of water that is required (m³/d) and the solar irradiance available.

The purpose of the controller is twofold. Firstly, it matches the output power that the pump receives with the input power available from the solar panels. Secondly, a controller usually provides a low voltage protection, whereby the system is switched off, if the voltage is too low or too high for the operating voltage range of the pump. This increases the lifetime of the pump thus reducing the need for maintenance. Other ancillary functions include automatically shutting down the system when water source level is low or when the storage tank is full, regulating water output pressure, blending power input between the solar panels and an alternate power source such as the grid or a petrol generator, and remotely monitoring and managing the system through an online portal offered as a cloud service by the manufacturer.

Voltage of the solar pump motors can be AC (alternating current) or DC (direct current). Direct current motors are used for small to medium applications up to about 4 kW rating, and are suitable for applications such as garden fountains, landscaping, drinking water for livestock, or small irrigation projects. Since DC systems tend to have overall higher efficiency levels than AC pumps of a similar size, the costs are reduced as smaller solar panels can be used.

Finally, if an alternating current solar pump is used, an inverter is necessary that changes the direct current from the solar panels into alternating current for the pump. The supported power range of inverters extends from 0.15 to 55 kW and can be used for larger irrigation systems. However, the panel and inverters must be sized accordingly to accommodate the inrush characteristic of an AC motor. To aid in proper sizing, leading manufacturers provide proprietary sizing software tested by third party certifying companies. The sizing software may include the projected monthly water output which varies due to seasonal change in insolation.

Application- CHINA PROFESSIONAL WATER PUMP MANUFACTURE AC LOAD POWER 1300W

Solar powered water pumps can deliver drinking water as well as water for livestock or irrigation purposes. Solar water pumps may be especially useful in small scale or community based irrigation, as large scale irrigation requires large volumes of water that in turn require a large solar PV array. As the water may only be required during some parts of the year, a large PV array would provide excess energy that is not necessarily required, thus making the system inefficient.

Solar PV water pumping systems are used for irrigation and drinking water in Africa. The majority of the pumps are fitted with a 2000 watt - 3,700 watt motor that receives energy from a 4,800 Wp PV array. The 5hp systems can deliver about 124,000 liters of water/day from a total of 50 meters setoff head and 70 meters dynamic head.

Pump Models-CHINA PROFESSIONAL WATER PUMP MANUFACTURE AC LOAD POWER 1300W

 New Energy dc solar water pump  200WCHINA PROFESSIONAL WATER PUMP MANUFACTURE AC LOAD POWER 1300W

The solar DC deep well submersible pump is a combination of solar panel light energy into electric energy and low-voltage dedicated solar water pump. It does not need to lay cable lines, which is convenient and practical, and easy to operate. There is no need to configure the battery. When there is sunlight, the pump automatically pumps water and stops working without sunlight. If the battery is configured, it can be pumped continuously and can be used continuously on rainy days.

Advantages of low-pressure solar pumps- High quality New Energy dc solar water pump  200WCHINA PROFESSIONAL WATER PUMP MANUFACTURE AC LOAD POWER 1300W

1.  Permanent magnet brushless synchronous motor: increase efficiency by 15%-20%, save energy and reduce solar panel consumption

2.  321 stainless steel motor shaft; 304 stainless steel pump shaft

3.  304 stainless steel impeller; copper cylinder

4.  Japan NSK Bearing

5.  Alloy mechanical seal, long life and reliable operation

6.  Intelligent water shortage protection: the program detection automatically stops when there is no water in the well, and automatically starts after 30 minutes.

7.  The synchronous motor has high power density, and the weight and volume of the same power pump are smaller than those of other manufacturers.

8.  Pump 3 years warranty, solar panel 10 years warranty, controller 1 year warranty

Controller advantages- High quality New Energy dc solar water pump  200W

(1) MPPT function, the highest solar utilization rate

(2) The 24V/48V/96V controller has an automatic charging function to ensure that the solar pump is charged while charging the battery; in the absence of sunlight, the battery can keep the solar pump working continuously.

(3) Digital display of power, voltage, current, speed and other working conditions

(4) Frequency conversion function: It can automatically convert the frequency according to the sunlight power, and can also manually adjust the speed operation according to actual needs.

(5) Automatic power on and off

(6) Waterproof and sealed: double sealing effect

(7) High temperature resistance: up to 850C high temperature

(8) Soft start: no inrush current, protect the pump motor

(9) High/low voltage protection, overcurrent/overload protection, stator coil never burns.

Workshop-High quality New Energy dc solar water pump  200W

Products Packing-CHINA PROFESSIONAL WATER PUMP MANUFACTURE AC LOAD POWER 1300W

Shipping-CHINA PROFESSIONAL WATER PUMP MANUFACTURE AC LOAD POWER 1300W