Rapid: Result in 5 minutes
Simple: rapid surfaces or solids screening test
Convenient: Ready to use, keep in normal temperature, no need to refrigerate
Save cost: Simultaneous detection of several drugs

OEM/ODM:

One-step Multi-Drug Screening Test for 23 types of drugs and in combinations of 2-14 in multi panel cassette, dipcard and multi panel integrated cups. 

Test Procedure:

[DIRECTIONS FOR USE ]

Test device (in closed pouches), samples, and controls should be brought to room

temperature (15-30°C) prior to testing. Do not open pouches until ready to perform the

assay.

Remove the test device from its protective pouch and label the device with patient’s

identification or control label.

FOR SURFACES

1. Wipe with the strips over the surface in which the drugs are expected

2. Take off the cap of supplied tube;

3. Fill all buffers from the supplied tube of buffer into the protection cover.

4. Insert the Multi Test slowly and carefully into the protection cover with buffer

4. Wait for lines to appear on the membrane and read the results after 5 minutes and do not

FOR SOLIDS

1. Open the tube and put the solid in to the buffer.

2. Close the tube with dropper and cap. Shake it a short time. Wait for 30 sec.

3. Take off the cap of supplied tube;

4. Fill all buffers with dissolved substances into the protection cover.

5. Insert the Multi Test slowly and carefully into the protection cover with buffer.

6. Wait for lines to appear on the membrane and read the results after 5 minutes and do not

interpret the result after 10 minutes.

Drug tests available in Gem Medic brand:

[SUMMARY ]

The Multi-Drug Rapid Test Panel is a rapid surfaces or solids screening test that can be performed without the use of an instrument. The test utilizes monoclonal antibodies to selectively detect elevated levels of specific drugs on surfaces and

in solids.