QL4518 automatic edge sealing and cutting machine + DC-4825 heat shrink packaging machine
1. Introduction to sealing and cutting machine
Packaging flow chart:
Scope of application:
pharmaceutical, food, stationery, cosmetics, electronic products, toys, etc.
Performance characteristics:
1. Fully enclosed packaging. The appearance of the package is beautiful.
2. Automatic film feeding, bag making, sealing and cutting, waste collection, leveling, shrinking, and packaging finished products are completed in one time.
3. Constant temperature special grade aluminum alloy sealing cutter, no film sticking, fine sealing line, no coking, no smoke, zero pollution.
4. When the cutter cuts into the package, it will automatically rebound, and it will not be mistakenly cut and the safety is high.
5. The size of the package can be adjusted freely without changing the mold.
6. The performance of the whole machine is stable, it can be operated continuously for a long time, and the failure rate is extremely low.
Technical Parameters:
Model | QL4518 |
Maximum package size | L unlimited*W400*H180 ml |
Sealing size | L infinite *W450 ml |
Power | 1.30kw |
Working efficiency | 1200-1600 packs / hour |
Power supply | 220V 50-60Hz |
Machine net weight | 260kg |
Machine size | 1700*900*1400mm |
Basic configuration:
Sealing cylinder | IC63 B65/C06 | Yaderong |
Delivery cylinder | IC40 B40/C06 | Yaderong |
Filter valve |
| Yaderong |
Conveyor motor |
| Oute |
Time relay |
| Taiwan CKC |
Pcc |
| Omron |
Function switch |
| Japan Izumi |
Emergency stop switch |
| Japan Izumi |
Smart watch |
| Xinpu |
Counter |
|
|
Body sensor |
| Autonics |
Travel switch |
| Tiande |
2. Introduction to the shrinking machine
Shrinking machine performance characteristics:
1. Using hot air circulation technology, the high-power wind-driven motor cooperates with the preset air-passage channel to produce uniform heat-circulating wind in the furnace, and the shrinkage effect is ideal and the heat energy loss is greatly reduced.
2. The stainless steel heating tube is used to greatly improve the service life, and it can be used normally for 5-10 years.
3. The conveyor chain adopts the roller design, the jacket is resistant to high temperature fiber casing, and the bottom contraction effect is ensured.
4. The whole body adopts carbon steel structure and the surface is sprayed. .
5. The inner insulation layer is sandwiched, and the furnace mouth is insulated by high temperature insulation material.
Technical Parameters:
Furnace length | 1200mm |
Furnace width | 480mm |
Furnace height | 250mm |
Entrance to furnace spacing | 200mm |
Exit to furnace spacing | 200mm |
Overall weight about | 350kg |
Speed | 0-10m/min adjustable |
Temperature | 0-300°C adjustable |
Power supply | 415V (three-phase four-wire) 50HZ |
Power | 8.8KW |
Chain transfer, plus stand, height 720mm. |
Machine packing inside is plastic films and outside is fumigation wooden case.Our wooden case is very strong,it can bear long time shipping on the sea.And machine with preservative film,it can stop the salt sea water enter into the machine and make the machine corrosion.
Packaging Details
1) The surface of the machine is stainless steel or paint protection.
2) sealed packaging will be wrapped in the machine.
3) Outer packaging is no fumigation wooden box
4) Port: Shanghai China
5) Lead Time : within 7-15 days
1) Upon receipt of payment , delivery date will be in 3-15days
2) By Air, by Sea or by Express (DHL etc)
3) Shipment cost will depend on the destination, shipment way,
size and the weight of the goods.