COMELINK-BPG150 type ONU products fully comply with IEEE 802.3-2005 and ITU-T G.984.x . It is operative, manageable and maintainable at telecommunication level, and can provide high speed data service for customers. It has a PON uplink port that connects to office end apparatus through optical fiber.
➤ Comply with ITU-T g.984 standard
➤ It supports layer 2 switching of Ethernet services and line speed forwarding of uplink and downlink services
➤ Support frame filtering and suppression
➤ Support the standard 802.1Q VLAN function and VLAN conversion
➤ 4094 VLANs supported
➤ Support dynamic bandwidth allocation
➤ Support PPPoE, ipoe, bridge and other services
➤ Support QoS, including service flow classification, priority marking, queuing and scheduling, traffic shaping and traffic control
➤ Support Ethernet port speed limit, loop detection and layer-2 isolation
➤ Support power failure alarm
➤ Support remote reset and restart functions
➤ Support the function of restoring factory parameters
➤ Support data encryption
➤ Support status detection and fault reporting
➤ Support power lightning protection
✦ PON: connect the OLT equipment at the source end through the optical fiber line
✦ Ethernet port: it is connected to the user side equipment through twisted pair network cable, and the port rate is 10 / 100 / 1000m
✦ Reset button: restart the equipment; Press and hold for more than 3 seconds and the system will return to the factory default
✦ Power switch: power on / off
✦ Power interface: connected to external power supply
♣ support wavelength division multiplexing technology, single fiber dual wave bidirectional transmission
♣ interface type: SC / APC
♣ maximum spectral ratio: 1:128
♣ rate: uplink 1.25gbps, downlink 2.5Gbps
♣ output optical power: - 1 ~ + 4dbm
♣ receiving sensitivity: < - 27dBm
♣ The longest distance between OLT and ONU is 20km
♠ Power supply: 12V / 0.5A
♠ Operating temperature: 0 ° ~ 40 ℃
♠ Storage temperature: - 40 ° ~ 70 °
♠ chassis specification: 88 * 81 * 25MM (length * width * height)